FB4 16 Channel DMX Profile layout

Note that this profile is active when the FB4 is in operation mode **DMX-512**
or **ArtNET** and in menu    "DMX settings", the profile "FB3" is chosen. 
The 16 and 39 channel fixture profiles are not available at the same time.
ChannelsValueFunctionDescriptionWidth
10-255DMX Modes0-31 Blackout
33-95 Four channels
97-159 Eight channels
161-232 Twelve channels
225-255 Sixteen channels
8 Bit
20-255Page index
(9 pages in total)
0-15 Page 1
17-31 Page 2
33-47 Page 3
49-63 Page 4
65-79 Page 5
81-95 Page 6
97-111 Page 7
113-127 Page 8
129-255 Page 9
8 Bit
30-255Cue Index
(48 cues in total)
0-32 None active
33-35 Cue 1
37-39 Cue 2
.. - .. ..
221-223 Cue 48
225-255 Repeat
8 Bit
4 1)0-255Cue Speed0-15 Full Speed
17-31 Pause
33-255 25 till 200%
8 Bit
5 0-255Dimmer0 till 100%8 Bit
6 0-255Zoom0 till 100%8 Bit
7 0-255Size X-100 till 100%8 Bit
8 0-255Size Y-100 till 100%8 Bit
9 0-255Angle Z0 till 360 degrees8 Bit
100-255Position X0 = left
128 = Center
255 = Right
8 Bit
110-255Position Y0 = top
128 = center
255 = bottom
8 Bit
120-255Visible pointsZero Points till 100% of points visible8 Bit
13 2)0-255Scan Rare0-31 Cue preferred speed
33-223 6K till 29K
225-255 30K
8 Bit
140-255Cue release0-31 Default
33-95 Hold
97-159 Loop
161-223 Next
225-255 Stop
8 Bit
150-255Color Scroll0-31 Original cue color
33-223 Color Scroll
225-255 White
8 Bit
160-255ReservedReserved8 Bit

Cheat Sheet

Click here to download the Cheat sheet

1)
If a BPM based effects is exported at 100BPM, and you want to have a cue running on 128 BPM, change the channel speed to 128.
2)
Lowering the scan rate can impact the cue speed of the laser